Forums | USR | Can't get V.90 connection thou the line is capable | Watch |
Author | Topic |
elgus Tl Posts: 3 Argentina | Posted - 2/13/2001 7:23:02 PM This is a tough question. I welcome to the bravest one who dares to answer it ! :) I bought recently a 3Com U.S. Robotics 56K Message Modem. The problem is I can't get any V.90 connection. I only get V.34 or V.34+. The line is V.90 capable because I get 40-44 K with another modem ( a cheap HSP winmodem ) and
One link download a 0 bytes upgrade.exe and the other returs a page telling I have the latest code. I've tried with everyting unplugged, and the modem directly connected to the incoming telco wires. One thing that seems unusual to me is the hanshake. I believe this is the key of the problem. According to what I've read this problem may indicate an bad compatibility between the modem and the ISP hardware. So I've tried with four different ISP ( I don't know exactly what hardware are they running but seems I suspected the modem was somehow broken or defective. Please, I've tried everything and haven't any success. I need some light. As you surely have guessed I'm no natively english speaker. I'm in Argentina. Regarding the connection of the cheap HSP modem, it usually connect at 40000 But the HSP sometimes connect at : Recv: <cr><lf>CONNECT 38666/PROTOCOL: LAPM/COMPRESSI Which of course it's only a V.90 possible value. So i'm pretty sure that the line is V.90 and so the ISP. I believe the key of the problem is the 5 sec. of silence at the start of the hanshake. But this happens no matter what ISP I call. ( I've tried 4 of them ) If I disabe x2 through S32 register ( S32=34) there's no 5 sec pause in the I can't get any response from 3COM / USR support ! Thanks in advance.
ATI3 ATI7 Product type Asia External FLASH date 3/2/99 DSP date 3/2/99 PTT Approval rev 1.0.0 ATY11 Freq Level (dB) 150 18 And modemlog.txt 02-09-2001 22:33:01.10 - U.S. Robotics 56K Message in use. ********************************************************************************************** ATZ and AT&F1 With another ISP atz OK Chars sent 3 Chars Received 127 Retrains Requested 0 Retrains Granted 1 Data Compression V42BIS 2048/32 Online U.S. Robotics 56K Message Link Diagnostics...
150 23 **********************************************************************************************
|
LizardKing Tl Posts: 14 United Kingdom | Posted - 2/14/2001 12:17:42 PM This is exacly what i was gettin (see *28,8k connection on a V90 modem). It did turn out to be the line as i tried it in a friends comp and it got a v90 straight It now gets a low rate V90 but only cos the telephone wire from the main box in my house is soldered straight on the modem. |
elgus Tl Posts: 3 Argentina | Posted - 2/14/2001 4:23:17 PM OK. I've saw you message after post mine. But the strange thing is I get V.90 connections with a cheap crappy HSP modem. Same line , same everything except modem of course. I have suspected all my life that USR were the best modems. Maybe I was wrong. I've tried with the modem connected to the incoming telco wires. But not actually soldered it. An it didn't work. The line seems good according AT stuff. Should I give up hope with 3COM modem - my line combination. Will it ever work if I do something ? Any ideas ? and Lizard, please tell me exaclty what you have done with your line-modem connection to made it work. Thanx. |
LizardKing Tl Posts: 14 United Kingdom | Posted - 2/14/2001 6:31:28 PM I was too getting a V90 on a Genius 56k modem no probs. And i was stressing all the time it was the modems fault. But 1st id get you medem tested on a different line to rule the modem out. Ive also got a higher quality extension going into my modem. I dont know were you live but in the UK if we phone up the phone line company we can get the line gain increased (its free here but i dont know about were you live). And i would'nt recomend soldering your phone line onto your modem unless you are competent with a soldering iron. Also switch off the line if you can as a current still flows threw and can short on the Iron. Hope you do get it sorted, i was on the verge of puttin it threw the top window of a 10story building. Also make sure there are no splits in the line were it goes to a different part of your house. Even thou i ususally only get a 34-40k connection i still get a lower ping in games than that of my Genius modem which usualy connected at 45k. So i guess USR modems arent all that bad. |
SARGE Tl Posts: 743 USA | Posted - 2/14/2001 7:15:22 PM My old USR gets up to 50666, along with Supra Express (internal and external), Boca Tidalwave, USR internal and even a Lucent. Every USR I've bought the past 2 years wouldn't budge past a v34. Kept none of them. |
LizardKing Tl Posts: 14 United Kingdom | Posted - 2/15/2001 2:37:23 PM I have noticed that USR do seem to be tempomentle about getting a V90 connection. But you really should get it tested on a different line. If it still isnt working then you should consider taking it back and getting a different brand, unless someone else can give you help. |
v.Richard Tl Posts: 6222 USA | Posted - 2/17/2001 10:06:44 AM I would suspect that your line is served by digital carrier facilities that the USR firmware is unable to deal with and get a 56k connection. I would suggest trying to add comma(s) to end of dialed # to see if that makes a difference; if it does not, I would recommend disabling 56k on the modem. Aloha, |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |