|Forums | USR | ATY11 Command||Watch|
|Posted - 3/1/2001 1:48:33 PM |
Exactly how does one do various commands such as this? What does it mean, disconnect and then wait 15 seconds and issue command? How? Thanks. Karl
|Posted - 3/2/2001 1:34:30 AM |
If you're using Windows & Dialup Networking, easy!
Go to the Dialup Networking control panel, right-click on your connection, left click on properties. Click the "Configure" button below the list box that shows the model of your Modem.
Click on the "Options" Tab. Under "Connection Control", you'll see "Open Terminal Before Dialing". Click the box next to it to make it checked. Now click "OK", "OK". Double-click on your connection and attempt to connect normally. You'll notice a black window appears. Enter in any AT commands you want to test (e.g. ATi6 ATi11, ATY11, etc.) in this box!
|Posted - 3/7/2001 11:32:35 AM |
The ATY11 command should be done after disconnecting. Use Hyperterminal.
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |