Forums | USR | error control off or unknown | Watch |
Author | Topic |
lobb Tl Posts: 26 USA | Posted - 5/26/2001 10:22:49 AM even though the error control and required to connect are turned on,in "view log" it reads error control off or unknown. the modem is v everything isa flashed to 56k. nothing else is changed. any advice?? Edited by - lobb on 5/26/01 10:42:48 AM |
v.Richard Tl Posts: 6222 USA | Posted - 5/26/2001 11:26:25 AM If you have the incorrect .inf file installed for the modem, the modem's CONNECT response will not be recognized and the log will also show this. Post that portion of log w/ lines before including CONNECT msg from modem. www.808news.com/56k/x2-inf1.htm Modemlog shows .inf file name; USR site has flash & .inf files. Aloha, |
lobb Tl Posts: 26 USA | Posted - 5/26/2001 2:25:33 PM thanks here it is modem inf path:MDMUSRCR.INF modem inf section: Modem 35 57600,N,8,1 57600,N,8,1 initializing modem Send: ATE0Q0V1<cr> Recv: <cr><lf>OK<cr><lf> Interpreted response: ok Send: AT&F1&B1&C1&D2E0Q0U1&A3S0=0<cr> Recv: <cr><lf>OK<cr><lf> Interpreted response: ok Send: AT&A0<cr> Recv: <cr><lf>OK<cr><lf> Interpreted response: ok Dialing. Send: ATDT#######<cr> Recv: <cr><lf>CONNECT 50666<cr><lf> Interpreted response: Connect Connection established at 50666bps Error-control off or unknown. Data compression off or unknown. Hanging up the modem. Hardware hangup by lowering DTR. Recv: <cr><lf>NO CARRIER<cr><lf> Interpreted response: No Carrier Send: ATH<cr> Recv: <cr><lf>OK<cr><lf> Interpreted response: ok 57600,N,8,1 Session Statistics: Reads:817391 bytes Writes:43467 bytes Serial Overrun Errors:4 |
lobb Tl Posts: 26 USA | Posted - 5/26/2001 6:24:52 PM ok richard thanks i got it i installed mdmcrv90.inf and all is well. error control is ON! |
v.Richard Tl Posts: 6222 USA | Posted - 5/30/2001 10:17:57 AM Your extra settings AT&A0 disables the report of ARQ (error control) Remove it. Aloha, |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |