Modemsite's Forum56 - The Modem Board
Main | profile | register | search | help | Ad-free Login
Forums | USR | 3Com 56k PCMCIA    Watch  
Author Topic
Dan Boutell
Tl Posts:
3

Posted - 6/16/2001 4:50:10 AM  Show Profile  Email Poster  Edit Message
I have a 3Com Megahertz 56k PCMCIA modem in my new Toshiba Satellite Laptop running Windows 2000. I bought and installed this modem when the onboard Zircom MPCI would not connect faster than 26.4 (v.34)on known good v.90 capable phone lines.

The laptop came with Win 98 SE installed. The connect speeds were exactly the same

Now, with Win 2000 and the 3Com Megahertz modem I am connecting at the same speeds as the onboard Zircom was connecting at.

Has anyone got any ideas on what to try next?

v.Richard
Tl Posts:
6222

USA		Posted - 6/16/2001 10:17:10 AM  Show Profile  Email Poster  Edit Message  v.Richards Homepage
Check/post ati6i11y11 diag screens
www.808news.com/56k/diag3com.htm

Aloha,
Richard

Dan Boutell
Tl Posts:
3

Posted - 6/18/2001 8:03:34 AM  Show Profile  Email Poster  Edit Message
ati6

3CCM156 56K Global Modem PC Card Link Diagnostics...

Chars sent 19 Chars Received 76
Chars lost 0
Octets sent 19 Octets Received 85
Blocks sent 19 Blocks Received 15
Blocks resent 0

Retrains Requested 0 Retrains Granted 0
Rate Switches 1
Line Reversals 0 Blers 0
Link Timeouts 0 Link Naks 0

Data Compression V42BIS 2048/32
Equalization Long
Fallback Enabled
Protocol LAPM
Speed 28800/26400
Current Call 00:01:04

Online

OK
ati11
3CCM156 56K Global Modem PC Card Link Diagnostics...

Modulation V.34
Carrier Freq (Hz) 1829/1920
Symbol Rate 3200/3200
Trellis Code 64S-4D/64S-4D
Nonlinear Encoding ON/ON
Precoding OFF/ON
Shaping OFF/ON
Preemphasis (-dB) 1/4
Recv/Xmit Level (-dBm) 27/14
Near Echo Loss (dB) 64
Far Echo Loss (dB) 19
Carrier Offset (Hz) -720
Round Trip Delay (msec) 4
Timing Offset (ppm) -928

v.Richard
Tl Posts:
6222

USA		Posted - 6/19/2001 6:44:07 PM  Show Profile  Email Poster  Edit Message  v.Richards Homepage
And the aty11 please?

Aloha,
Richard

Dan Boutell
Tl Posts:
3

Posted - 6/22/2001 6:53:26 AM  Show Profile  Email Poster  Edit Message
Sorry for the delayed responce, out of town. When I entered aty11, the modem responded with a message that said something like "this not a valid command".

However, while I was gone one of my associates found a firmware update at 3com and installed it. It now connects consistently in the high 40's.

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |