Author |
Topic |
jtanga Tl Posts: 9
| Posted - 8/11/2001 8:38:52 PM Well its kinda strange i think there is a Lowest settings in aol or in usr that will make yung connect with no data compression and error control I just put this in aol advance modem settings.. S32=66&K3&M4&N20 and viola there is no errol and compression...but it says in the modem log....08-11-2001 14:16:27.30 - Initializing modem. 08-11-2001 14:16:27.30 - Send: AT#CLS=0<cr> 08-11-2001 14:16:27.30 - Recv: AT#CLS=0<cr> 08-11-2001 14:16:27.42 - Recv: <cr><lf>OK<cr><lf> 08-11-2001 14:16:27.42 - Interpreted response: Ok 08-11-2001 14:16:27.42 - Send: AT&F1E0Q0V1&C1&D2S0=0<cr> 08-11-2001 14:16:27.43 - Recv: AT&F1E0Q0V1&C1&D2S0=0<cr> 08-11-2001 14:16:27.55 - Recv: <cr><lf>OK<cr><lf> 08-11-2001 14:16:27.55 - Interpreted response: Ok 08-11-2001 14:16:27.55 - Send: ATS7=60S19=0L0M0&M0&K0&H1&R2&I0B0X4<cr> 08-11-2001 14:16:27.68 - Recv: <cr><lf>OK<cr><lf> 08-11-2001 14:16:27.68 - Interpreted response: Ok 08-11-2001 14:16:27.68 - Send: AT&F1&D2&R2S6=5S7=60S10=15S32=66&K3&M4&N20M0X4 08-11-2001 14:16:27.81 - Recv: <cr><lf>OK<cr><lf> 08-11-2001 14:16:27.81 - Interpreted response: Ok 08-11-2001 14:16:27.82 - Dialing. 08-11-2001 14:16:27.82 - Send: ATDT;<cr> 08-11-2001 14:16:27.82 - Recv: ATDT;<cr> 08-11-2001 14:16:29.29 - Recv: <cr><lf>OK<cr><lf> 08-11-2001 14:16:29.29 - Interpreted response: Ok 08-11-2001 14:16:29.29 - Dialing. 08-11-2001 14:16:29.29 - Send: ATDT#######<cr> 08-11-2001 14:16:29.29 - Recv: ATDT9651074<cr> 08-11-2001 14:16:42.45 - Recv: <cr> 08-11-2001 14:16:42.45 - Interpreted response: Informative 08-11-2001 14:16:42.45 - Recv: <lf> 08-11-2001 14:16:42.45 - Interpreted response: Informative 08-11-2001 14:16:43.45 - Recv: CONNECT 32000/ARQ/x2/LAPM/V42BIS<cr><lf> 08-11-2001 14:16:43.45 - WARNING: Unrecognized response. Retrying... 08-11-2001 14:16:43.45 - Connection established at 115200bps. 08-11-2001 14:16:43.45 - Error-control off or unknown. 08-11-2001 14:16:43.45 - Data compression off or unknown. But the connection is working fine ....No lag in games....and the speed is good....TRY IT |
Bob Starnes Tl Posts: 4360
USA | Posted - 8/11/2001 9:31:49 PM > 08-11-2001 14:16:43.45 - Recv: CONNECT 32000/ARQ/x2/LAPM/V42BIS<cr><lf> > 08-11-2001 14:16:43.45 - WARNING: Unrecognized response. Retrying... > 08-11-2001 14:16:43.45 - Connection established at 115200bps. > 08-11-2001 14:16:43.45 - Error-control off or unknown. > 08-11-2001 14:16:43.45 - Data compression off or unknown.And you're connected at 32000bps with X2, you're NOT connected at 115200 which is the PORT speed (modem to computer). Error Compression and Data Compression are "OFF or Unknown", not good with a 56k connection (32000bps/X2 is a 56k connection). What do you get if you remove the "init string" from AOL's advanced modem setup (leave it blank)? Post a modem log without the string. |
SARGE Tl Posts: 743
USA | Posted - 8/12/2001 11:22:53 AM You disabled v.90 (s32=66) and set a max speed of 32000 (&n20). That's one reason gaming improved. To disable compression, change the &k3 to &k0 That's a zero, btw. Edited by - SARGE on 8/12/01 11:25:11 AM |
jtanga Tl Posts: 9
| Posted - 8/12/2001 7:15:05 PM here it is 08-12-2001 19:11:00.26 - Modem type: U.S. Robotics 56K Voice INT PnP 08-12-2001 19:11:00.26 - Modem inf path: 3COMCO~1.INF 08-12-2001 19:11:00.26 - Modem inf section: ModemPCMVin 08-12-2001 19:11:00.51 - 115200,N,8,1 08-12-2001 19:11:00.51 - 115200,N,8,1 08-12-2001 19:11:00.51 - Initializing modem. 08-12-2001 19:11:00.51 - Send: AT#CLS=0<cr> 08-12-2001 19:11:00.51 - Recv: AT#CLS=0<cr> 08-12-2001 19:11:00.64 - Recv: <cr><lf>OK<cr><lf> 08-12-2001 19:11:00.64 - Interpreted response: Ok 08-12-2001 19:11:00.64 - Send: AT&F1E0Q0V1&C1&D2S0=0<cr> 08-12-2001 19:11:00.64 - Recv: AT&F1E0Q0V1&C1&D2S0=0<cr> 08-12-2001 19:11:00.76 - Recv: <cr><lf>OK<cr><lf> 08-12-2001 19:11:00.76 - Interpreted response: Ok 08-12-2001 19:11:00.76 - Send: ATS7=60S19=0L0M1&M0&K0&H1&R2&I0B0X4<cr> 08-12-2001 19:11:00.89 - Recv: <cr><lf>OK<cr><lf> 08-12-2001 19:11:00.89 - Interpreted response: Ok 08-12-2001 19:11:00.89 - Send: AT&F1&D2&R2S6=5S7=60S10=15M0X4<cr> 08-12-2001 19:11:01.02 - Recv: <cr><lf>OK<cr><lf> 08-12-2001 19:11:01.02 - Interpreted response: Ok 08-12-2001 19:11:01.02 - Dialing. 08-12-2001 19:11:01.02 - Send: ATDT;<cr> 08-12-2001 19:11:01.03 - Recv: ATDT;<cr> 08-12-2001 19:11:02.52 - Recv: <cr><lf>OK<cr><lf> 08-12-2001 19:11:02.52 - Interpreted response: Ok 08-12-2001 19:11:02.52 - Dialing. 08-12-2001 19:11:02.52 - Send: ATDT#######<cr> 08-12-2001 19:11:02.52 - Recv: ATDT9651074<cr> 08-12-2001 19:11:18.23 - Recv: <cr><lf>CONNECT 44000/ARQ/V90/LAPM/V42BIS<cr><lf> 08-12-2001 19:11:18.23 - Interpreted response: Connect 08-12-2001 19:11:18.23 - Connection established at 44000bps. 08-12-2001 19:11:18.23 - Error-control on. 08-12-2001 19:11:18.23 - Data compression on. 08-12-2001 19:11:42.89 - Hanging up the modem. 08-12-2001 19:11:42.89 - Hardware hangup by lowering DTR. 08-12-2001 19:11:43.15 - Recv: <cr><lf>NO CARRIER<cr><lf> 08-12-2001 19:11:43.15 - Interpreted response: No Carrier 08-12-2001 19:11:43.15 - Send: ATH<cr> 08-12-2001 19:11:43.15 - Recv: ATH<cr> 08-12-2001 19:11:43.27 - Recv: <cr><lf>OK<cr><lf> 08-12-2001 19:11:43.27 - Interpreted response: Ok 08-12-2001 19:11:43.27 - 115200,N,8,1 08-12-2001 19:11:43.28 - Session Statistics: 08-12-2001 19:11:43.28 - Reads : 28897 bytes 08-12-2001 19:11:43.28 - Writes: 11642 bytes 08-12-2001 19:11:43.28 - U.S. Robotics 56K Voice INT PnP closed. |
Bob Starnes Tl Posts: 4360
USA | Posted - 8/12/2001 9:40:48 PM Where's this string comming from? AT&F1&D2&R2S6=5S7=60S10=15M0X4Looks like it's in the Extra Settings but could still be something sent by AOL's setup. It's really not need since DUN has already sent the best setting to the modem in the two previous strings. Looks like a much better connection, higher connect speed WITH Error Control & Data Compression. How's the throughput (download speeds) and gaming now? |
jtanga Tl Posts: 9
| Posted - 8/12/2001 11:44:00 PM well the download is ok...but the games is skipping...too many packet loss....well when i add that init string...the games is more stable..but in unknown reason...the ping becomes high....lowest maybe 200 something...but im using x2 |
jtanga Tl Posts: 9
| Posted - 8/12/2001 11:50:25 PM Yeah thats the default init string in the aol....hmm...when i try to enable the data compression...the ping is goood....hmmm..im gonna try just to cap the speed connection....Im gonna try it... |
Bob Starnes Tl Posts: 4360
USA | Posted - 8/13/2001 8:39:40 PM I believe your thinking is on the right track now. |