Modemsite Forum56 - The Modem Bulletin Board

Forums | USR | courier v.everything 56k disconnects

Watch

Author	Topic
troolin Tl Posts: 3 USA	Posted - 8/24/2001 2:22:49 PM It ramdomly disconnects and ati6 shows disconnect reason is "Invalid Codeword" What can I do? Thanks!
SARGE Tl Posts: 743 USA	Posted - 8/24/2001 6:40:34 PM v.42 compression took a hit: http://modemsite.com/56k/DIAG3COM.HTM
Bob Starnes Tl Posts: 4360 USA	Posted - 8/24/2001 6:47:24 PM http://modemsite.com/56k/diag3com.htm Invalid codeword: The modem received an invalid V.42 bis (compression) frame. Post the complete ati6i11 results
troolin Tl Posts: 3 USA	Posted - 8/24/2001 8:35:39 PM This is what came up this time. Chars sent 217542 Chars Received 2544117 Chars lost 0 Octets sent 149024 Octets Received 2144772 Blocks sent 10463 Blocks Received 19021 Blocks resent 4 Retrains Requested 0 Retrains Granted 0 Line Reversals 0 Blers 45 Link Timeouts 0 Link Naks 0 Data Compression V42BIS 1024/32 Equalization Long Fallback Enabled Protocol LAPM SREJ 128/5 Speed 44000/21600 Last Call 00:18:52 Disconnect Reason is Extra Stepup
troolin Tl Posts: 3 USA	Posted - 8/25/2001 8:50:10 AM USRobotics Courier V.Everything Link Diagnostics... Chars sent 716908 Chars Received 3729130 Chars lost 0 Octets sent 521553 Octets Received 2707725 Blocks sent 17936 Blocks Received 25734 Blocks resent 66 Retrains Requested 0 Retrains Granted 0 Line Reversals 0 Blers 436 Link Timeouts 3 Link Naks 0 Data Compression V42BIS 1024/32 Equalization Long Fallback Enabled Protocol LAPM SREJ 128/5 Speed 42666/21600 Last Call 00:28:54 Disconnect Reason is Illegal Command Code OK USRobotics Courier V.Everything Link Diagnostics... Modulation V.90/V.34+ Carrier Freq ( Hz ) NONE/1920 Symbol Rate 8000/3200 Trellis Code NONE/16S-4D Nonlinear Encoding NONE/OFF Precoding NONE/OFF Shaping OFF/ON Preemphasis Index NONE/10 Recv/Xmit Level (-dBm) 20.5/16.7 SNR ( dB ) 43.5 Near Echo Loss ( dB ) 9.4 Far Echo Loss ( dB ) Roundtrip Delay (msec) 17 Timing Offset ( ppm) -5074 Carrier Offset ( ppm) 74 RX Upshifts 2 RX Downshifts 1 TX Speedshifts 0 V.90 Status uu,5,12N,12.5,-7,1N,0,41.3,25.0
Bob Starnes Tl Posts: 4360 USA	Posted - 8/25/2001 7:35:22 PM I see that you got a good answer from Hooda in the other newsgroup.
shiekh Tl Posts: 34 USA	Posted - 9/5/2001 11:30:30 AM I've seen the same problem on my 2 Courier V everything But never such a problem with my Sportsters. This renders my Couriers useless. Is there a work around?
Bob Starnes Tl Posts: 4360 USA	Posted - 9/5/2001 6:12:17 PM Disable 'Compression Data' in the Modem Properties and try a connection.
shiekh Tl Posts: 34 USA	Posted - 9/6/2001 2:34:10 PM Such a cure is worse than the symptom I was hoping to make my Couriers competative with my Sportsters. Maybe when the new code come out.

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |