Modemsite's Forum56 - The Modem Board
Main | profile | register | search | help | Ad-free Login
Forums | USR | USR 568603 didn't dial pulse after firmware update    Watch  
Author Topic
ludo1972
Tl Posts:
3

Bulgaria
Posted - 10/4/2001 2:34:49 PM  Show Profile  Email Poster  Edit Message
Can somebody help me to find what is the problem with my USR 5686 mode? After firmware update to V92 modem didn't dial pulse.
Bob Starnes
Tl Posts:
4360

USA
Posted - 10/4/2001 5:13:50 PM  Show Profile  Email Poster  Edit Message
Possibly in addition to setting the modem to pulse dial in the 'Dialing Properties' you may have to use the &Pn setting to set the pulse dial rate:

&Pn Pulse Mode - Select pulse (rotary) dial make/break ratios for use in a particular country or region.
[Default varies]
&P0 Pulse Dial Disabled.
&P1 U.S./Canada/Austria/Czech./Denmark/Finland/Germany/Switzerland/Italy/Netherlands/S. Africa/(2nd option for Asia/France/Korea/Norway/S. Africa).
&P2 Australia/Asia/Belgium/France/Ireland/Korea/Portugal/S. Africa/Spain/U.K.
&P3 Norway.
&P4
&P5 Japan.
&P6 Sweden.
&P7 (2nd option for Australia).

ludo1972
Tl Posts:
3

Bulgaria
Posted - 10/5/2001 4:03:10 AM  Show Profile  Email Poster  Edit Message
Where I must post &Pn kommand and what is the sintax?
Is it AT&Pn ?
ludo1972
Tl Posts:
3

Bulgaria
Posted - 10/5/2001 5:20:32 AM  Show Profile  Email Poster  Edit Message
Thank you very much Bob. It is working nice...
Bob Starnes
Tl Posts:
4360

USA
Posted - 10/5/2001 9:39:56 AM  Show Profile  Email Poster  Edit Message
Well, guess you figured out that you need to use the &Pn setting in the Extra Settings box.

Ex. enter &P1 in the Extra Settings (no "AT" needed).

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |