|Forums | USR | help plz about phone cable||Watch|
|Posted - 1/22/2002 10:04:58 AM |
i have a 56k message modem (extern)
but i don't have the cable to connect modem and line phone
i have the cable from my internal modem (olitec)
result : it doesn't seem to work ( the modem is okay i think)
when i boot, a red led (TR) flash one time, and one time just after windows loaded.
is the usr cable specific ?? Must messages in memory be cleared before ?
|Posted - 1/22/2002 10:13:52 AM |
here is the modem log
01-22-2002 18:15:52.960 - File: C:\WINNT\System32\unimdm.tsp, Version 5.0.2175 - Retail
|Posted - 1/22/2002 11:12:53 AM |
what os are you using.
56K Message Modem (81-015668-01)
|Posted - 1/22/2002 4:51:32 PM |
Appears that Windows is timing out waiting for a response from the modem after the init string is sent, could be using the wrong .inf file or it's possible the modem's firmware is corrupt.
See http://modemsite.com/56k/x2-hyperterm.htm for setting up Hyperterminal.
In Hyperterminal issue ati7 and post the results.
|Posted - 1/23/2002 11:04:43 AM |
An external modem needs to cables -
the phone cord to connect the modem to phone line, and a serial cable to connect the modem to the computer.
Sounds as if you do not have the modem connected to the computer with a serial cable?
These cables can be purchased as most stores that carry computer-related stuff. They generally are not supplied with external modems, and must be purchased separately.
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |