Forums | USR | USR can not hold a connection | Watch |
Author | Topic |
sophie Tl Posts: 2 USA | Posted - 2/1/2002 6:22:08 AM I'm using an USRobotics 56k external modem and can not hold a connection. It connects and then about 2-4 seconds later it hangs up. This happens on sending calls and receiving calls. The log where it disconnects looks like this. Any help would be greatly apprecitated. Thanks Send: ATA<cr> |
v.Richard Tl Posts: 6222 USA | Posted - 2/1/2002 1:22:45 PM Are you connecting with Windows' Dial Up Networking (DUNS)? If so, you should get a DUNS Error. www.modemsite.com/56k/dunserror.asp The modemlog is not much help except to tell you the remote modem hung up - you need to find out why and the DUNS Error may hold clues - the answer maybe in your connectoid settings There are other possibilities - but more info needed... Aloha! Richard. |
GaryJones32 Tl Posts: 1 USA | Posted - 2/16/2002 7:49:15 PM Hi, this is not exactly the answer everybody is looking for But: I think your problems are solved by turning off 56k protocoll. 56k v.90 connected to a flex hangs up every time it tries to renegotiate a line. To fix: in extra settings type the string: s32=98 this will disable 56k. Also i think it could be if you have the "automatic detect settings" box checked and you should not -- every time it tries to outoconfig it might hang up. Gary |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |