Modemsite's Forum56 - The Modem Board
Main | profile | register | search | help | Ad-free Login
Forums | Agere (Public) | Outbound MOH calls    Watch  
Author Topic
deweydog
Tl Posts:
2

USA		Posted - 12/3/2003 9:13:40 AM  Show Profile  Email Poster  Edit Message
I get "Modem on Hold denied" on an attempted outbound call, and this also corrupts something so I have to reboot to get the MOH to respond to clicking the "A" icon in the tray,
i.e, the MOH screen refuses to reappear.

Hyperterminal nets:

ati11

Description Status
--------------- ------------
Last Connection V.92
Initial Transmit Carrier Rate 19200
Initial Receive Carrier Rate 44000
Final Transmit Carrier Rate 19200
Final Receive Carrier Rate 44000
Protocol Negotiation Result LAPM
Data Compression Result V44
Estimated Noise Level 466 <note>
Receive Signal Power Level (-dBm) 7
Transmit Signal Power Level (-dBm) 14
Round Trip Delay (msec) 0
Press any key to continue; ESC to quit.

Description Status
--------------- ------------
Near Echo Level (-dBm) 0
Far Echo Level (-dBm) 0
Transmit Frame Count 117
Transmit Frame Error Count 0
Receive Frame Count 169
Receive Frame Error Count 3
Retrain by Local Modem 0
Retrain by Remote Modem 0
Call Termination Cause 0
Robbed-Bit Signaling NA
Digital Loss (dB) NA
Remote Server ID NA
Connection Time (sec) 15.613

OK

charles
Tl Posts:
5879

USA		Posted - 12/3/2003 10:32:48 AM  Show Profile  Email Poster  Edit Message
What OS are you using and driver for this modem.Will MOH work on other functions?
deweydog
Tl Posts:
2

USA		Posted - 12/3/2003 11:40:19 AM  Show Profile  Email Poster  Edit Message
Thanks for responding.

I use Win2K and I have not had an inbound call (while on line)since I installed the modem Tuesday afternoon (in California)

Richard Gamberg advises that my ISP's MOH in the culprit, and I have informed them

Ken Kraner

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |