Modemsite's Forum56 - The Modem Board
Main | profile | register | search | help | Ad-free Login
Forums | Agere (Public) | Windows 2000 reboot when I use Lucent Winmodem    Watch  
Author Topic
fellow-villager
Tl Posts:
1

Russia		Posted - 6/16/2004 1:03:02 AM  Show Profile  Email Poster  Edit Message
If I use Lucent Winmodem driver and Synaptics touchpad driver (on COM1) I have the problem with any connections via modem. Windows 2000 reboot itself. I have no problem with connections via other modem (mobile phones on COM2 and COM4). After deleting Synaptics touchpad driver all work OK. Also I have no problems when I used NT4.
charles
Tl Posts:
5879

USA		Posted - 6/16/2004 6:16:20 PM  Show Profile  Email Poster  Edit Message
These two devices can not share the same com port. Have you tried the update drivers at synaptics?
http://www.synaptics.com/support/downloads.cfm

Might disable com1 in the bios reinstall the modem,remove the touchpad drivers,reboot and reinstall and see if the touchpad will go to other port.

charles
Tl Posts:
5879

USA		Posted - 6/16/2004 6:37:44 PM  Show Profile  Email Poster  Edit Message
First, if you have a new TouchPad, plug it in and reboot Windows 2000 /WinXP.Windows 2000 / WinXP will then detect your new TouchPad and install a standard mouse driver to handle it. You cannot install the Synaptics TouchPad driver until this process is complete and your touchPad is functioning as a normal pointing device.
Log on to your system as "Administrator", or as another user with administrator privileges.
Run "Setup.exe". This program will automatically install the Synaptics TouchPad driver to handle all PS/2 and Serial pointing devices attached to your computer.
You will need to restart Windows after the installation is complete.
If the driver has been installed correctly, after you have restarted Windows you should see the TouchPad Icon in your task bar next to the clock. Also, a dialog box entitled "Information about your TouchPad"
will pop up. You can prevent this dialog box from coming up in the future by checking the "Stop showing me this message" checkbox.

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |