Forums | Agere (Public) | modem on hold compatibilty | Watch |
Author | Topic |
lisa7467 Tl Posts: 4 USA | Posted - 12/8/2004 4:14:14 PM Hi I am trying to find out if the modem I have is compatible with the modem on hold I am hearing so much about. I have a lucent venus modem and that is all I know about it. I am trying to find out if the modem I have is already equipped with this or if I need to update. If someone could tell me how to check for more information I would appreciate it also. I can from the control panel access more modem information however, I do not know what the information means. I do not know what I am looking for. Please help!!!! Lisa |
v.Richard Tl Posts: 6222 USA | Posted - 12/9/2004 11:44:04 AM Get the response to ati3 i5 from Hyperterminal & post it. www.modemsite.com/56k/x2-hyperterm.asp www.modemsite.com/56k/venus.asp Aloha! Richard. |
lisa7467 Tl Posts: 4 USA | Posted - 12/9/2004 3:56:17 PM Richard, Thank you for responding to my question. I can not find my hyperterminal. I am running windows me. I went to start>programs>accessories>communications and do not have hyperterminal there.I went to search files and folders and found hyperterminal there but can not open it. It shows 0 bytes. I'm sorry if I am a bother,I know very little about computers. I would very much appreciate the help. The website modem.chke(going from my memory)is not exactly free. It is only free once the other version has been paid for so I cannot access help from there.I appreciate your help very much. Lisa |
v.Richard Tl Posts: 6222 USA | Posted - 12/10/2004 8:37:28 AM Control Panel-> add/remove programs - click on the Windows Setup Tab; double-click the 'commmunications' listing and click the Hyperterminal selection/
Aloha! Richard. |
lisa7467 Tl Posts: 4 USA | Posted - 12/23/2004 8:49:18 AM Hi Richard, Sorry it took me so long to get back with you. Christmas keeps everyone so busy!!!! I went to the diagnostics on my modem from the control panel and the ATI3 response is: LT V.90 1.0 MT5634ZPX Internal Data/F The ATI5 is: 1052099fV,0,34 If this is not a modem on hold ready modem is there a download available so that I can safely upgrade? Thanks, Lisa |
v.Richard Tl Posts: 6222 USA | Posted - 12/23/2004 9:28:21 AM MT5634ZPX = http://www.multitech.com/PRODUCTS/Families/MultiModemZPX/ This is an Agere Win Modem (formerly Lucent or LT Win Modem) chipset. Multitech customizes the ati3/i5 responses. It looks to me like Multitech made this model both as V.90 and V.92 and the standard info about this chipset/V.92 would apply: that is, if the modem has the 1648C DSP it will support V.92/MoH, and if it does not, it won't. Aloha! Richard. |
lisa7467 Tl Posts: 4 USA | Posted - 12/24/2004 12:29:50 PM Hi again Richard! I did the update and contacted my internet service to make the necessary changes for this service to work for me and i'm not sure if they are not giving me the right info or if I did something wrong with the down load. Should any of the info change in the ATI3 or ATI5 fields in the modem information? I checked both before and after the down load and everything stays the same in both locations. Once I added the information that my provider told me to add my modem did not respond to dial up. So I am not sure if I need to do something different or not. Please advise. Thanks, Lisa |
Pi Tl Posts: 89 USA | Posted - 12/24/2004 8:36:45 PM Multitech ZPX modems are Lucent/Agere Venus hardware modems. Multitech no longer supplies a DOS driver so the modems are often confused with Winmodems. Multitech does not offer a upgrade to V.92 for the V.90 version modem. The Multitech firmware Flash Utility will refuse to flash a V.90 version modem with the V.92 firmware. These are very good modems even with V.90 firmware. If you need to know who's calling when online you might try ; This unit does not allow you to put the incoming call on hold when online but it will announce a incoming call when online with light and sound and allows you to Ignore or Accept (hang-up) a incoming call. I did find the "chirping' sound it makes to announce a incoming call annoying. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |