 |
Modemsite's Forum56 - The Modem Board Main | profile | register | search | help | Ad-free Login |
| Forums | Conexant (Public) | missing drivers after recovery disk | Watch |
| Author | Topic |
| markus_mb Tl Posts: 2 Sweden | Posted - 3/4/2005 7:27:38 AM    Hallo, Don't know if any support is offered in the free forums. But I ask anyway. I have to install the right new drivers for ny internal modem, I think it is a Rockwell/Conexant,. I have opened my computer and found the Serial Number and more: S/N: 0K253379I CE 0197X Is this info enough? (I have downloaded som listmodem software at Conexant plus Acrobat instructions.) Here are some info about the modem from a textfile I found on a floppy which I think is the disk where the drivers were but most files has been erased by someone, so I can't use the floppy: [Manufacturer] [ROCK_26.posDup] |
| Pi Tl Posts: 89 USA | Posted - 3/7/2005 7:32:38 AM You can use a program to ID the modem by its PCI\Ven (Vendor) number built into the card. UnknownDevices by Halfdone. http://www.halfdone.com/Development/UnknownDevices/ Then use the online "Identify Unknown Modems" lookup at Modemhelp UK "Identify your modem:" help from Modemsite; "Identifying Your Modem Chipset" |
| v.Richard Tl Posts: 6222 USA | Posted - 3/9/2005 1:22:40 AM  Conexant offers generic drivers and also a modem identification utility (because there are different Conexant chipsets) see www.modemsite.com/56k/rockhcf.asp www.modemsite.com/56k/soft56.asp (The 3rd Conexant chipset - ACF - is hardware controller based and the modem will operate without any driver - www.modemsite.com/56k/rockacf.asp ) Aloha! Richard. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |