|Forums | Agere (Public) | Trying to install netcomm (agere software modem to compaq en series||Watch|
|Posted - 4/15/2005 6:02:06 AM |
I have just bought an netcomm IN5920_1 56K V.92 PCI Modem and am trying to install it in a Compaq Deskpro EN series 6350/6 4 A/P.
Op sys Windows 98
Modem connected to telephone line and telephone out working (ie dial tone heard through handpiece)
From Settings- Control Panel- Modems- Modem properties- Diagnostics Modem failed to respond ... Verify interrupt for the port is properly set
I also have PCI Bus mastering enabled.
anyone out there who can give me a hint as to what to do? (apart from deep sixing the compaq :) )
|Posted - 4/17/2005 8:13:26 PM |
I believe internal modems should be set to use com3. Com1 would work with an external.
|Posted - 4/18/2005 8:09:03 AM |
Thanks for the reply Custer. i haven't been able to find an option to install on com3!!
|Posted - 4/18/2005 9:41:05 AM |
You cannot install this type of modem using Add New Hardware (wizard).
You can only install modem using the software/driver supplied with the modem (or a compatible driver package obtained elsewhere.) The modem should have come with driver disk with files and program necessary to install it.
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |