Modemsite Forum56 - The Modem Bulletin Board

Forums | USR (Public) | usr 5610b disconnects

Watch

Author	Topic
dread Tl Posts: 11 USA	Posted - 6/6/2005 12:32:39 AM Hello everyone. I am getting disconnected allot. Sometimes I can stay on for minutes other times I can stay on for hours. I ran ati6 and got these so far Disconnect Reason is Unable to Retrain and Disconnect Reason is ???. Is there any software that will keep my modem log and not overright each time I connect I am using windows xp pro.
v.Richard Tl Posts: 6222 USA	Posted - 6/10/2005 12:58:27 AM Modemlog - check 'append to log' www.modemsite.com/56k/modemlog2k.asp However, the modemlog does not include diagnostics (ati6, etc.) Suggest: post your complete diagnostics ati6i11y11 Test with modem connected directly to demarc www.modemsite.com/56k/demarc.asp Aloha! Richard.
dread Tl Posts: 11 USA	Posted - 6/10/2005 11:51:53 PM I got the Append to Log checked but it still dont save it. Thats why I asked if there was any free software that would save it. Dont know why it will not save the logs. Here is the response I got from ati6 U.S. Robotics 56K FAX INT Link Diagnostics... Chars sent 3744042 Chars Received 29706730 Chars lost 0 Octets sent 2982126 Octets Received 26575938 Blocks sent 73702 Blocks Received 249651 Blocks resent 925 Retrains Requested 0 Retrains Granted 1 Line Reversals 0 Blers 2420 Link Timeouts 25 Link Naks 56 Data Compression V42BIS 1024/32 Equalization Long Fallback Enabled Protocol LAPM/SREJ Speed 52000/26400 V.90 Peak Speed 53333 Last Call 03:50:48 Disconnect Reason is ??? OK Forget to get the rest, next time I get disconnected ill do them all.
dread Tl Posts: 11 USA	Posted - 6/14/2005 8:57:57 PM Got it this time sorry ati11 U.S. Robotics 56K FAX INT Link Diagnostics... Modulation V.90/V.34 Carrier Freq (Hz) None/1920 Symbol Rate 8000/3200 Trellis Code None/64S-4D Nonlinear Encoding None/ON Precoding ON/ON Shaping OFF/ON Preemphasis Index 6/6 Recv/Xmit Level (-dBm) 15.1/8.6 Near Echo Loss (dB) 53.1 Far Echo Loss (dB) 0 Carrier Offset (Hz) 0 Round Trip Delay (msec) 19 Timing Offset (ppm) 7455 SNR (dB) 51.1 Speed Shifts Up/Down/Null 1/1/1 Status : uu,5,12N,12.2,-0,1N,000,46.2,-57.3,0 OK ati6 U.S. Robotics 56K FAX INT Link Diagnostics... Chars sent 298267 Chars Received 2321738 Chars lost 0 Octets sent 225345 Octets Received 1249196 Blocks sent 4968 Blocks Received 11683 Blocks resent 85 Retrains Requested 0 Retrains Granted 0 Line Reversals 0 Blers 63 Link Timeouts 0 Link Naks 22 Data Compression V42BIS 1024/32 Equalization Long Fallback Enabled Protocol LAPM/SREJ Speed 52000/28800 V.90 Peak Speed 53333 Last Call 00:17:06 Disconnect Reason is ??? OK ati7 Configuration Profile... Product type US/Canada Internal Product ID: 00561002 Options V32bis,V.80,V.34+,V.90,V.92 Fax Options Class 1/Class 2.0 Line Options Caller ID, Distinctive Ring Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 9/22/2003 FLASH rev 5.22.70 DSP date 9/22/2003 DSP rev 5.22.70 OK aty11 Freq Level (dB) 150 19 300 18 450 17 600 17 750 17 900 17 1050 17 1200 17 1350 17 1500 18 1650 18 1800 18 1950 18 2100 18 2250 18 2400 18 2550 18 2700 18 2850 19 3000 19 3150 19 3300 19 3450 20 3600 22 3750 26 OK
v.Richard Tl Posts: 6222 USA	Posted - 6/17/2005 8:11:59 PM Disconnect Reason is ??? this is what the modem log actually is showing??? That's not a normal USR item .... I would suggest - try to speed limit your modem to a max of 50.6k or even 49.3k and see if that has any effect www.modemsite.com/56k/x2-linklimit.asp Aloha! Richard.
dread Tl Posts: 11 USA	Posted - 6/18/2005 4:01:38 AM Lol yeah thats what it really says Disconnect Reason is ??? Decided to email USR tech and he is stumped. Said he never seen anything like it before lol. Wanted my isp and the number I dial lol. Ill give it a try and let you know ty.

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |