 |
Modemsite's Forum56 - The Modem Board Main | profile | register | search | help | Ad-free Login |
| Forums | Conexant (Public) | Conexant D110 MDC V.92 wont fllow software settings | Watch |
| Author | Topic |
| slick629 Tl Posts: 1 USA | Posted - 2/3/2006 10:14:10 AM    I have a conexant D110 MDC V.92 modem ati3 show SoftK56V_B2.1_V7.23.01 I cant get this modem to follow windows baud settings. Everytime I have to dial into a system I have to manually set the baud rate via this AT command at +MS=,,,9600,,9600 That works and all but is there anyway to get this modem to follow wither whats in window or whats in my dialing program ? |
| v.Richard Tl Posts: 6222 USA | Posted - 2/4/2006 5:32:41 PM  For softmodem, the port speed settings do not matter because there is no real COM port - it's a 'virtual' port created in software that is not limited like traditional COM ports are. To set the speed, you can put a protocol select setting in extra settings in modem properties - If you want speed limited to a 9600bps rate, the init string you use (without the at) can go in extra settings - but, better to use the Aloha! Richard. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |