|Forums | Conexant (Public) | SoftV90 PCI modem not woking with XP||Watch|
|Posted - 6/17/2007 11:28:24 AM |
I am having a problem getting a dial tone with a SoftV90 Voice Speakerphone PCI modem (as identified by XP).
The phone cords have been checked and I am able to run a regular phone through the modem and get a strong dial tone.
The XP-provided driver was released 7/18/03. The version is 126.96.36.199.
The chip is a Conexant R6793-17. Conexant's listmodem app reveals the following:
I can't find any Actiontec products that have a Conexant chip, even in the archive section.
I tried to upgrade using the Conexant HSF driver (GENHSF5.inf) and Windows doesn't recognize it as a valid driver source file (modem list is empty when Have Disk button is used to point to the folder that has this file).
Here are the query results:
ATQ0V1E0 - OK
The modem is on COM4 using IRQ16. I/O range 9000-9007
Under the driver file details, all of the Conexant HSF files are version 7.12.09 (not a typo). the mdmxsdk files are version 1.0.2.006.
FIFO buffers box is clicked. Port speed = 115200; Data protocol standard EC; Compression enabled; Hardware flow control. Data bits=8; Parity = none; Stop bits = 1. Receive and transmit buffers at full high.
Thanks in advance for your help,
|Posted - 6/25/2007 8:04:10 PM |
The driver would not appear to be an issue because it recognizes and responds to AT commands.
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |