 |
Modemsite's Forum56 - The Modem Board Main | profile | register | search | help | Ad-free Login |
| Forums | USR (Public) | USRobotics 56K Flash V 5.2.9 | Watch |
| Author | Topic |
| willkranz Tl Posts: 1 USA | Posted - 3/28/2008 10:46:02 AM     I recently got two external faxmodems on Ebay with the FLASH and DSP version above dated 2/16/2001 They are apparently V.92 capable, and I've never had one of these. I have posted a detailed web page at http://www.willsworks.net/usr-wav.htm It includes wave files of the sounds the modem makes when it tries to connect. It fails unless I set S32=4. This seems odd, its not the factory default and my older manual says thats a reserved code. Any ideas? |
| v.Richard Tl Posts: 6222 USA | Posted - 4/2/2008 11:33:09 AM OK, I checked out your audio and webpage that you linked --- Not sure I have all the answers (oh, I'm getting rusty with those USR modems as it's been a while for me) - but I do have questions.... When you say it won't connect w/ default settings - what exactly is that based upon? Would that include using Hyperterminal connected directly to the COM port and giving modem the AT&F1 for intialization? What value does s32 have after issuing AT&F1? With dial-up networking - is modem installed with the driver (.inf file) for the V.92 modem? (Win2k .inf link - The webpage you posted indicates you get a connect at 14.4k/v.92?!? What does your post-call diag's indicate (ati6 and ati11 screens which you can capture via Hyperterminal connected to modem com port)?
Aloha! Richard. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |