Modemsite's Forum56 - The Modem Board
Main | profile | register | search | help | Ad-free Login
Forums | Agere (Public) | NO SOUND FROM AGERE WIN MODEM    Watch  
Author Topic
RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 8:10:10 AM  Show Profile  Email Poster  Edit Message
This is the Modem that came with an HP XP system. Worked fine for a while and still does except for no sound at dial up, handshake, etc. Nothing is muted, sound card works although this is the Modem speaker. Reinstalled Driver with same results. Sound comes back for a few days and then is gone again. Any ideas would be appreciated.
charles
Tl Posts:
5879

USA		Posted - 8/20/2004 8:45:20 AM  Show Profile  Email Poster  Edit Message
Try this in extra settings.
M1L2


You can change it ti high with the L3

RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 9:02:33 AM  Show Profile  Email Poster  Edit Message
I tried MIL2 AS WELL AS M2 ...NEITHER WORKED. NOT SURE WHAT YOU MEAN BY L3. I also have the 8.31 version Driver...would 8.30 be better? Thanks.
charles
Tl Posts:
5879

USA		Posted - 8/20/2004 9:25:42 AM  Show Profile  Email Poster  Edit Message
You have (MIL2) Need M1L2

L3 would be M1L3 this will set the speaker to high
I have not check the 8.31 driver out yet.
Microsoft's Windows Update may offer a driver update for Agere (formerly Lucent) "LT Win Modems" or Agere Win Modems. The 8.31 driver was a special build for an Agere customer - fixing a problem that is not likely to occur for nearly all LT modem users. Because this driver did not undergo the testing normally done with general driver releases, Agere is not making this a general release and it won't appear at Modemsite. So, why is it on Windows Update? [When a driver is submitted to Microsoft's WHQL for testing and driver signature, the submitter indicates whether the driver is to be made available via Windows update.] Should you upgrade to 8.31? [It's safer to stay with 8.30.]


Please post a modem log.
Edited by - charles on 8/20/2004 9:28:34 AM

RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 9:28:46 AM  Show Profile  Email Poster  Edit Message
Yes, sorry I meant M1L2 and M2. Neither worked. HP shipped with 8.31. I could go back to 8.30 but doubt that is this problem.
charles
Tl Posts:
5879

USA		Posted - 8/20/2004 9:40:21 AM  Show Profile  Email Poster  Edit Message
What ISP do you use? The modem has it own speaker?
http://www.modemsite.com/56k/speaker.asp

charles
Tl Posts:
5879

USA		Posted - 8/20/2004 9:52:22 AM  Show Profile  Email Poster  Edit Message
Make sure.
Enable modem speaker box should be ticked, and Click Ok
http://www.kiwilink.co.nz/setup_winxp_tuning.php

charles
Tl Posts:
5879

USA		Posted - 8/20/2004 9:58:05 AM  Show Profile  Email Poster  Edit Message
Go into your Control Panel by first clicking on the Start Button.
Then click on Settings, then Control Panel.
Then double click on the Phone and Modem Options icon until it opens.
Now click on the Modems tab at the top of the screen.
Then click on the Properties button at the bottom right hand side of the screen.
Now click on the Modem tab at the top of the screen.
In the top center of the screen you will see the Speaker volume slider bar.
Adjust this volume slider bar according to your personal preferences.
Then click on the OK button to save your settings and exit the Modem properties window.
Then close all open windows to return back to your Windows session.
Then repeat the above procedure for any additional Dial-Up Connections you have.
RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 9:58:34 AM  Show Profile  Email Poster  Edit Message
Sound from the Modem comes from within the PC not my external speakers which work fine. I use a local ISP for dial up. The Modem speaker box is checked for enabled. This is a new PC only a few months old. HP through India was no help.
RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 9:59:28 AM  Show Profile  Email Poster  Edit Message
VOLUME WAS AND IS ALL THE WAY UP.
charles
Tl Posts:
5879

USA		Posted - 8/20/2004 10:28:30 AM  Show Profile  Email Poster  Edit Message
Did you have any problem with the 8.30 drivers? What model hp is this?
RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 10:56:50 AM  Show Profile  Email Poster  Edit Message
It came with 8.31 installed....I haven't tried 8.30 yet. No problems with 8.31 except this lack of sound which has occured. This is an HP a500n.
charles
Tl Posts:
5879

USA		Posted - 8/20/2004 12:13:44 PM  Show Profile  Email Poster  Edit Message
Would like to see a modem log to see if the AT command is in it.
RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 1:39:55 PM  Show Profile  Email Poster  Edit Message
Ok, I changed Driver from 8.13 to 8.30 still same problem. Here is the Modem Log:
08-20-2004 16:35:10.406 - File: C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2600
08-20-2004 16:35:10.437 - File: C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2600
08-20-2004 16:35:10.437 - File: C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2600
08-20-2004 16:35:10.453 - File: C:\WINDOWS\System32\uniplat.dll, Version 5.1.2600
08-20-2004 16:35:10.625 - File: C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2600
08-20-2004 16:35:10.625 - File: C:\WINDOWS\System32\modemui.dll, Version 5.1.2600
08-20-2004 16:35:10.640 - File: C:\WINDOWS\System32\mdminst.dll, Version 5.1.2600
08-20-2004 16:35:10.640 - Modem type: Agere Win Modem
08-20-2004 16:35:10.640 - Modem inf path: oem96.inf
08-20-2004 16:35:10.640 - Modem inf section: Modem_PNP_DSVD
08-20-2004 16:35:10.640 - Matching hardware ID: pci\ven_11c1&dev_044c&cc_0780
08-20-2004 16:35:11.015 - 115200,8,N,1, ctsfl=1, rtsctl=2
08-20-2004 16:35:11.015 - Initializing modem.
08-20-2004 16:35:11.031 - Send: AT<cr>
08-20-2004 16:35:11.046 - Recv: AT<cr>
08-20-2004 16:35:11.046 - Command Echo
08-20-2004 16:35:11.046 - Recv: <cr><lf>OK<cr><lf>
08-20-2004 16:35:11.046 - Interpreted response: OK
08-20-2004 16:35:11.062 - Send: AT &F E0 &C1 &D2 V1 S0=0\V1<cr>
08-20-2004 16:35:11.406 - Recv: AT &F E0 &C1 &D2 V1 S0=0\V1<cr>
08-20-2004 16:35:11.406 - Command Echo
08-20-2004 16:35:11.406 - Recv: <cr><lf>OK<cr><lf>
08-20-2004 16:35:11.406 - Interpreted response: OK
08-20-2004 16:35:11.421 - Send: ATS7=60S30=0L3M1\N3%C1 +DCS=1,1&K3B0B15B2X4<cr>
08-20-2004 16:35:11.437 - Recv: <cr><lf>OK<cr><lf>
08-20-2004 16:35:11.437 - Interpreted response: OK
08-20-2004 16:35:11.437 - Waiting for a call.
08-20-2004 16:35:11.453 - Send: ATS0=0<cr>
08-20-2004 16:35:11.468 - Recv: <cr><lf>OK<cr><lf>
08-20-2004 16:35:11.468 - Interpreted response: OK
08-20-2004 16:35:11.562 - 115200,8,N,1, ctsfl=1, rtsctl=2
08-20-2004 16:35:11.562 - Initializing modem.
08-20-2004 16:35:11.578 - Send: AT<cr>
08-20-2004 16:35:11.593 - Recv: <cr><lf>OK<cr><lf>
08-20-2004 16:35:11.593 - Interpreted response: OK
08-20-2004 16:35:11.609 - Send: AT &F E0 &C1 &D2 V1 S0=0\V1<cr>
08-20-2004 16:35:11.968 - Recv: <cr><lf>OK<cr><lf>
08-20-2004 16:35:11.968 - Interpreted response: OK
08-20-2004 16:35:11.984 - Send: ATS7=60S30=0L3M1\N3%C1 +DCS=1,1&K3B0B15B2X4<cr>
08-20-2004 16:35:12.000 - Recv: <cr><lf>OK<cr><lf>
08-20-2004 16:35:12.000 - Interpreted response: OK
08-20-2004 16:35:12.000 - Dialing.
08-20-2004 16:35:12.015 - Send: ATDT###-####<cr>
08-20-2004 16:35:37.453 - Recv: <cr><lf>CONNECT 44000 V42bis<cr><lf>
08-20-2004 16:35:37.453 - Interpreted response: Connect
08-20-2004 16:35:37.453 - Receive Connect but CD was low, Waiting for signal to go high
08-20-2004 16:35:37.484 - CD has been raised
08-20-2004 16:35:37.484 - Connection established at 44000bps.
08-20-2004 16:35:37.484 - Error-control on.
08-20-2004 16:35:37.484 - Data compression on.
08-20-2004 16:36:07.484 - Read: Total: 19997, Per/Sec: 665, Written: Total: 4738, Per/Sec: 155
charles
Tl Posts:
5879

USA		Posted - 8/20/2004 2:37:27 PM  Show Profile  Email Poster  Edit Message
L3M1 is in the default modem string.This is the first HP pc that I have seen with the 8.31 drivers installed.This driver is on windows update.Do you have the command L3M1 in extra settings?Might try removing the connectoid in the dial up folder and make a new one.Do you have more that one dial up icon in the dialup folder?
RSHOOTER
Tl Posts:
18

USA		Posted - 8/20/2004 5:23:53 PM  Show Profile  Email Poster  Edit Message
I just have the one icon. I am now operating the Modem with 8.30 I'm not sure I know how to do what you suggest and especially with the Version change.
Topic is 3 Pages Long:    1 2 3

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |