Forums | Other (Public) | Ambient HaM Modem | Watch |
Author | Topic |
Kath Tl Posts: 22 United Kingdom | Posted - 2/15/2004 2:49:47 PM Found it.. both are enabled ..strange! |
charles Tl Posts: 5879 USA | Posted - 2/15/2004 3:58:45 PM Check in device manager under ports that the modem is on. http://www.adriansrojakpot.com/Other_Articles/Win2K_Tips/Fast_COM/Fast_COM.htm |
Kath Tl Posts: 22 United Kingdom | Posted - 2/16/2004 7:04:46 AM My Modem uses COM3 and is not listed in Device Manager with COM1 & COM2 .. is that incorrect? |
charles Tl Posts: 5879 USA | Posted - 2/16/2004 8:18:24 AM Post a modem log to see if the change in the port speed was made.Did you change it to 115,200? Also go to hyperterminal. Type in AT enter,then AT&f enter,then ATI0 to ATI6 to get the modem info.Do you know if this is a pci or isa modem?
How is the modem listed in the connect using window in modem properties? |
Kath Tl Posts: 22 United Kingdom | Posted - 2/16/2004 8:47:55 AM Modem log 02-16-2004 16:46:50.593 - File: C:\WINNT\system32\unimdm.tsp, Version 5.0.2195 - Retail 02-16-2004 16:46:50.603 - File: C:\WINNT\system32\unimdmat.dll, Version 5.0.2195 - Retail 02-16-2004 16:46:50.613 - File: C:\WINNT\system32\uniplat.dll, Version 5.0.2195 - Retail 02-16-2004 16:46:50.653 - File: C:\WINNT\system32\drivers\modem.sys, Version 5.0.2195 - Retail 02-16-2004 16:46:50.653 - File: C:\WINNT\system32\modemui.dll, Version 5.0.2195 - Retail 02-16-2004 16:46:50.653 - Modem type: Ambient HaM Data Fax 02-16-2004 16:46:50.653 - Modem inf path: oem0.inf 02-16-2004 16:46:50.653 - Modem inf section: HaM 02-16-2004 16:46:50.833 - 115200,8,N,1, ctsfl=1, rtsctl=2 02-16-2004 16:46:50.843 - Initializing modem. 02-16-2004 16:46:50.853 - Send: AT<cr> 02-16-2004 16:46:50.873 - Recv: AT<cr> 02-16-2004 16:46:50.873 - Command Echo 02-16-2004 16:46:51.044 - Recv: <cr><lf>OK<cr><lf> 02-16-2004 16:46:51.044 - Interpreted response: OK 02-16-2004 16:46:51.054 - Send: AT&F E0 Q0 X4 S0=0 &D2 &C1 &S0 V1 W4 E1<cr> 02-16-2004 16:46:51.084 - Recv: AT&F E0 Q0 X4 S0=0 &D2 &C1 &S0 V1 W4 E1<cr> 02-16-2004 16:46:51.084 - Command Echo 02-16-2004 16:46:51.624 - Recv: <cr><lf>OK<cr><lf> 02-16-2004 16:46:51.624 - Interpreted response: OK 02-16-2004 16:46:51.634 - Send: ATS7=60S30=0L2M3+ES=3,0,2;%C1+DS=3,0;&K3 X4<cr> 02-16-2004 16:46:51.654 - Recv: ATS7=60S30=0L2M3+ES=3,0,2;%C1+DS=3,0;&K3 X4<cr> 02-16-2004 16:46:51.654 - Command Echo 02-16-2004 16:46:52.165 - Recv: <cr><lf>OK<cr><lf> 02-16-2004 16:46:52.165 - Interpreted response: OK 02-16-2004 16:46:52.165 - Waiting for a call. 02-16-2004 16:46:52.175 - Send: ATS0=0<cr> 02-16-2004 16:46:52.205 - Recv: ATS0=0<cr> 02-16-2004 16:46:52.205 - Command Echo 02-16-2004 16:46:52.436 - Recv: <cr><lf>OK<cr><lf> 02-16-2004 16:46:52.436 - Interpreted response: OK 02-16-2004 16:46:52.436 - 115200,8,N,1, ctsfl=1, rtsctl=2 02-16-2004 16:46:52.436 - Initializing modem. 02-16-2004 16:46:52.446 - Send: AT<cr> 02-16-2004 16:46:52.476 - Recv: AT<cr> 02-16-2004 16:46:52.476 - Command Echo 02-16-2004 16:46:52.646 - Recv: <cr><lf>OK<cr><lf> 02-16-2004 16:46:52.646 - Interpreted response: OK 02-16-2004 16:46:52.656 - Send: AT&F E0 Q0 X4 S0=0 &D2 &C1 &S0 V1 W4 E1<cr> 02-16-2004 16:46:52.686 - Recv: AT&F E0 Q0 X4 S0=0 &D2 &C1 &S0 V1 W4 E1<cr> 02-16-2004 16:46:52.686 - Command Echo 02-16-2004 16:46:53.217 - Recv: <cr><lf>OK<cr><lf> 02-16-2004 16:46:53.217 - Interpreted response: OK 02-16-2004 16:46:53.227 - Send: ATS7=60S30=0L2M3+ES=3,0,2;%C1+DS=3,0;&K3 X4<cr> 02-16-2004 16:46:53.257 - Recv: ATS7=60S30=0L2M3+ES=3,0,2;%C1+DS=3,0;&K3 X4<cr> 02-16-2004 16:46:53.257 - Command Echo 02-16-2004 16:46:53.758 - Recv: <cr><lf>OK<cr><lf> 02-16-2004 16:46:53.758 - Interpreted response: OK 02-16-2004 16:46:53.758 - Dialing. 02-16-2004 16:46:53.768 - Send: ATDT###########<cr> 02-16-2004 16:46:53.798 - Recv: ATDT08089933025<cr> 02-16-2004 16:46:53.798 - Command Echo 02-16-2004 16:47:20.085 - Recv: <cr><lf><cr><lf> 02-16-2004 16:47:20.085 - Unknown Response 02-16-2004 16:47:20.716 - Recv: <cr><lf>PROTOCOL: LAP-M<cr><lf><cr><lf>COMPRESSION: V.42 02-16-2004 16:47:20.716 - An unknown response was received while attemping to connect, but CD was high so completeing successfully 02-16-2004 16:47:20.716 - Connection established at 115200bps. 02-16-2004 16:47:20.716 - Error-control off or unknown. 02-16-2004 16:47:20.716 - Data compression off or unknown. 02-16-2004 16:47:50.709 - Read: Total: 513, Per/Sec: 11, Written: Total: 1771, Per/Sec: 57 |
Kath Tl Posts: 22 United Kingdom | Posted - 2/16/2004 9:05:37 AM It's a PCI modem Hyperterminal ERROR quote: It's COM3 and 115200
|
charles Tl Posts: 5879 USA | Posted - 2/16/2004 9:35:41 AM In hyperterminal just do one at a time. ATI0 enter then do ati1 enter...ect. I think you have the wrong drivers for this modem.This is a pci modem you will not show com port in the device manager for this modem. Showing connection. Connection established at 115200bps this not correct,this is the port speed.Put W2 in extra settings. Edited by - charles on 2/16/2004 9:39:19 AM |
charles Tl Posts: 5879 USA | Posted - 2/16/2004 10:00:55 AM MDMAMB2K.INF would be for the hardware modem. |
charles Tl Posts: 5879 USA | Posted - 2/16/2004 11:03:57 AM MDMCIR2K.EXE] (36KB) Intel® V.90 modem chipset driver for MD565X, MD5650, and MD5651 (ISA, Serial, and PCMCIA) chipsets.
|
Kath Tl Posts: 22 United Kingdom | Posted - 2/16/2004 11:53:52 AM quote: I'm sorry, I'm totally confused as to what goes where now.. I've been in and out of all these windows so many times, some seem to have the same settings in other places. *sob* I've got the drivers you pointed me too. Perhaps you could walk me through what setting I should have where and how to install these drivers as i've done different things for different ones..and I'm lost now |
Kath Tl Posts: 22 United Kingdom | Posted - 2/16/2004 12:15:27 PM I've not changed anything else yet.. here is the Hyperterminal log. ATi0 OK OK OK OK OK OK |
charles Tl Posts: 5879 USA | Posted - 2/17/2004 1:29:07 AM This is what we were looking for MD5628D-L-A to find out what modem you have.Also note you have the country selection set for USA 1 You are getting these setting because of the wrong drivers installed. 02-16-2004 16:47:20.716 - Error-control off or unknown. 02-16-2004 16:47:20.716 - Data compression off or unknown. Not to worry we will get this worked out.I was letting know that Connection established at 115200bps this not correct,this is the port speed This is from nothing you have done,wrong file will cause this. Some notes about this modem chipset. |
charles Tl Posts: 5879 USA | Posted - 2/17/2004 1:48:22 AM Model:E-Tech PCI56AVP faxmodem (model A)
Click on Start button at the bottom left-hand corner of the screen. Edited by - charles on 2/17/2004 2:19:03 AM |
Kath Tl Posts: 22 United Kingdom | Posted - 2/17/2004 6:26:10 AM Just one question Charles, before I go ahead. In the installing your Modem instructions...Regarding 'Select the port where your modem is connected to'! The diagram shows COM1 & COM2 .. mine is COM3 but never shows up when you look at Ports in Device Manager! What do I do in this case ? Thank you for being patient. |
charles Tl Posts: 5879 USA | Posted - 2/17/2004 9:07:48 AM When you reboot and windows finds new hardware and you install the drivers windows should put the modem back to port 3.If you are not using com1 com2 for other devices I would disable them in the device manager.The page that I listed is just for reference it should show com3 on your pc.Were did you get the drivers that you installed the first time? You will not see the port in device manager because it makes a software port,the ports you see in the device manager are hardware ports.This is why your modem is being installed on com3. Edited by - charles on 2/17/2004 9:19:13 AM |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |