Forums | Conexant (Public) | SoftV90 PCI modem not woking with XP | Watch |
Author | Topic |
mburnett70 Tl Posts: 1 USA | Posted - 6/17/2007 11:28:24 AM I am having a problem getting a dial tone with a SoftV90 Voice Speakerphone PCI modem (as identified by XP). The phone cords have been checked and I am able to run a regular phone through the modem and get a strong dial tone. The XP-provided driver was released 7/18/03. The version is 7.12.9.0. The chip is a Conexant R6793-17. Conexant's listmodem app reveals the following: ===================================================================== ===================================================================== MODEM #1: DEDUCED INFORMATION: Notes... I can't find any Actiontec products that have a Conexant chip, even in the archive section. I tried to upgrade using the Conexant HSF driver (GENHSF5.inf) and Windows doesn't recognize it as a valid driver source file (modem list is empty when Have Disk button is used to point to the folder that has this file). Here are the query results: ATQ0V1E0 - OK The modem is on COM4 using IRQ16. I/O range 9000-9007 Under the driver file details, all of the Conexant HSF files are version 7.12.09 (not a typo). the mdmxsdk files are version 1.0.2.006. FIFO buffers box is clicked. Port speed = 115200; Data protocol standard EC; Compression enabled; Hardware flow control. Data bits=8; Parity = none; Stop bits = 1. Receive and transmit buffers at full high. Thanks in advance for your help, Mike |
v.Richard Tl Posts: 6222 USA | Posted - 6/25/2007 8:04:10 PM www.modemsite.com/56k/lightning.asp www.modemsite.com/56k/duns680.asp The driver would not appear to be an issue because it recognizes and responds to AT commands. Aloha! Richard. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |