Modemsite Forum56 - The Modem Bulletin Board

Forums | USR | Not getting 56k on a USR Sportster Flash EXT???

Watch

Author	Topic
fairchild Tl Posts: 5	Posted - 7/20/2000 9:49:15 AM Ok its not as simple as that, i know u cant get 56k so save urself explainations why u can't... the problem is that although im getting a v.90 connection (e.g. higher than 33k) but not high enough, its roughly abt 37-38k... i have a dedicated phone line 4 the internet(e.g. no splitters, long cables, etc) and the phone line is decent quality... my old Aztech winmodem got speeds of 44-48k... so what the hell is the problem?! i changed 2 an external modem because it was supposed 2 be better quality than winmodems and it works with Linux... ive phoned 3com, bt, worldonline, localtel... all useless... can any1 help? plz, i cant handle it nemore!! ARrrrrrggghhhhhhh... Ahem... sorry... f.a.i.r.c.h.i.l.d
fairchild Tl Posts: 5	Posted - 7/20/2000 10:41:39 AM this is the spew i got from the hyper terminal using ati6 parameter... U.S. Robotics 56K Voice EXT Link Diagnostics... Chars sent 977044 Chars Received 6013733 Chars lost 0 Octets sent 519345 Octets Received 4572636 Blocks sent 22177 Blocks Received 47080 Blocks resent 40 Retrains Requested 0 Retrains Granted 0 Line Reversals 0 Blers 93 Link Timeouts 0 Link Naks 9 Data Compression V42BIS 2048/32 Equalisation Long Fallback Enabled Protocol LAPM Speed 38666/28800 V.90 Peak Speed 38666 Last Call 01:22:55 Disconnect Reason is DTR dropped OK
SARGE Tl Posts: 743 USA	Posted - 7/20/2000 11:53:23 AM Have you tried this procedure with #'s from Richard's site http://www.808news/56k/trouble4.htm. Using the same connection, keep typing ati6 until the site disconnects you. BTW, what was the SNR for ati11?
fairchild Tl Posts: 5	Posted - 7/20/2000 3:25:56 PM i couldnt do ati6 while it was connected but here is what ati11 came up with... btw the link doesnt work nemore... ati11 U.S. Robotics 56K Voice EXT Link Diagnostics... Modulation V.90 Carrier Freq (Hz) None/1920 Symbol Rate 8000/3200 Trellis Code None/64S-4D Nonlinear Encoding None/ON Precoding None/ON Shaping ON/ON Preemphasis (-dB) 2/8 Recv/Xmit Level (-dBm) 24/14 Near Echo Loss (dB) 9 Far Echo Loss (dB) 0 Carrier Offset (Hz) NONE Round Trip Delay (msec) 7 Timing Offset (ppm) 2805 SNR (dB) 38.4 Speed Shifts Up/Down 0/0 Status : aa,5,13Y,13.6,-0,0N,0,38.7,30.4 OK
v.Richard Tl Posts: 6222 USA	Posted - 7/21/2000 5:39:44 PM It appears you are not in the USA? i11 showing a-law codec type; the server you are calling is set for max xmt level of -13dbm (in US it normally is -12), and cannot compensate for digital pad; Bottom line: to the # you are calling on the phone facilities you have, you're unlikely to do better without either an improvement in firmware for the server modems, or improvement in firmware for your modem, or phone company changing facilities used to provide service.... Aloha, Richard

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |