 |
Modemsite's Forum56 - The Modem Board Main | profile | register | search | help | Ad-free Login |
| Forums | Other (Public) | FAX+HTM?? | Watch |
| Author | Topic |
| bitCOM Tl Posts: 3 Spain | Posted - 3/10/2004 6:46:45 PM    I am trying to transfer "text" typed in the Hyperterminal window to the FAX. Please someone suggest me the right way to transfer ASCII data to the remote fax using AT commands. utility of AT+FTM and auto-answer(ATS0=1)?? how storage telephone number in Hyperteminal (AT&Z1=num does not work)?? well........thank you very much |
| bitCOM Tl Posts: 3 Spain | Posted - 3/10/2004 7:46:23 PM I uses W98SE and Conexant HCF modem.......thanks  |
| v.Richard Tl Posts: 6222 USA | Posted - 3/12/2004 9:36:11 AM  You can't do that. Fax isn't a text-oriented transmission, it's a bitmap (picture). You need to convert what you want to send to fax format, and send it with fax software - not Hyperterminal. Most fax software gives you the ability to 'print' anything to the fax format. Aloha! Richard. |
| bitCOM Tl Posts: 3 Spain | Posted - 3/12/2004 6:06:52 PM Thank you very much v.Richard What can you tell me about commands:AT+FTM, ATD(P or T, what and when use it??) thanks again |
| v.Richard Tl Posts: 6222 USA | Posted - 3/12/2004 10:40:50 PM AT+FTM=## sets the modem for a particular fax modem protocol. D = dial command You can use Hyperterminal to set modem to fax modem, you can use Hyperterminal to dial another (fax) modem; but, once connected, the only data that will be meaningful to the other end is a properly formatted fax bitmap - forget trying to send text. Aloha! Richard. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |