Forums | Conexant (Public) | Conexant D480 not answering | Watch |
Author | Topic |
ssuttle Tl Posts: 3 Ireland | Posted - 7/29/2004 4:57:26 AM Hi.... I have a Dell Insipon 2650 with internal modem as above. It dials out ok but will not answer incoming. have tried Dell !!!! Where do I start? Simon |
charles Tl Posts: 5879 USA | Posted - 7/29/2004 11:05:14 PM Could you please explain a little more on what you need. Do you what this modem to take incoming calls? |
ssuttle Tl Posts: 3 Ireland | Posted - 7/30/2004 7:24:14 AM Sorry for lack of info. A client wishes to transfer data to us via modem, using some old software called datatalk32. My latop is approx 1.5 yrs old but have never had to use internal modem(am on company network). When testing it earlier this week I can connect out from it, but when I try testing it by ringing the line the modem is connected to, nothing happens. I don't want modem to take voice calls - just receive data from client. Simon |
charles Tl Posts: 5879 USA | Posted - 7/30/2004 8:25:48 AM You can have the modem take the call by puting S0=2 in the extras setting box.You can set the modem to answer on the number of rings.Just change the 2 to what you want.Note 0 is zero.Can't find any info on the program datatalk32 What OS are yoou using. S0= Number of Rings to Auto-Answer: Sets the number of rings required before the modem automatically answers a call. http://www.zoom.com/documentation/dial_up/100498D.pdf |
ssuttle Tl Posts: 3 Ireland | Posted - 7/30/2004 9:14:12 AM OS is Win2000. datatalk32 (see www.datasoft-direct.co.uk)was developed in UK 8yrs ago(our client has been using it without problems for a number of years). Simon |
v.Richard Tl Posts: 6222 USA | Posted - 7/30/2004 9:41:11 AM As Charles said, modem must have s0 register set to something greater than 0 to autoanswer. You need to be running terminal program (datatalk may be a terminal program?) on both machines; the answering machine must have the port opened and modem initialized with the s0 register set. Alternately, you can manually issue an answer command by typing You could use Hyperterminal connected directly to COM port to do this assuming Datatalk uses file xfer protocol that is also supported by Hyperterminal. Aloha! Richard. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |