Modemsite Forum56 - The Modem Bulletin Board

Modemsite's Forum56 - The Modem Board
Main | profile | register | search | help | Ad-free Login

Forums | USR | Limiting Link Speed

Watch

Author	Topic
v.Richard Tl Posts: 6222 USA	Posted - 12/6/2003 9:11:33 AM While I'm not using a USR modem regularly at this time - at the time when it was my primary one, I had similar frustrating experiences with the speed limit commands not always working as expected. The only other thing I could suggest is experimenting with various other settings as well - I'd try in Hyperterminal starting with AT&F1 followed by the speed limit, then dial command... Aloha! Richard.
jimbo62 Tl Posts: 23 USA	Posted - 12/7/2003 1:17:11 PM quote: Try ATI4 and ATI5 in hyperterminal.Display the current modem settings Well, here is the output from ATI4 and ATI5. I don't see anything suspicious. Regards, jimbo ati4 U.S. Robotics 56K Voice INT Settings... B0 E1 F1 L2 M1 Q0 V1 X4 Y0 BAUD=115200 PARITY=N WORDLEN=8 DIAL=TONE ON HOOK CID=0 &A3 &B1 &C1 &D2 &G0 &H1 &I0 &K1 &M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1 S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000 S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S40=001 S41=000 S42=000 LAST DIALED #: OK ati5 U.S. Robotics 56K Voice INT NVRAM Settings... Template Y0 DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4 BAUD=115200 PARITY=N WORDLEN=8 &A3 &B1 &C1 &D2 &G0 &H1 &I0 &K1 &M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1 S00=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000 S15=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S40=001 S41=000 S42=000 Strike a key when ready . . . Template Y1 DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4 BAUD=115200 PARITY=N WORDLEN=8 &A3 &B1 &C1 &D2 &G0 &H2 &I2 &K1 &M4 &N0 &P0 &R1 &S0 &T5 &U0 &Y1 S00=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000 S15=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S40=001 S41=000 S42=000 STORED PHONE #0: #1: #2: #3: OK
charles Tl Posts: 5879 USA	Posted - 12/8/2003 7:31:18 AM Try this to see if the modem speed will change. S32=66 in extra settings.Should force V34 Might also try shut down and turn power off to the tower. Think the modem should be reset to harware flow control. Note the atz command ftp://ftp.usr.com/usr/dl07/sp_asci.txt Edited by - charles on 12/8/2003 8:06:08 AM
jimbo62 Tl Posts: 23 USA	Posted - 12/8/2003 1:39:46 PM quote: Try this to see if the modem speed will change. S32=66 in extra settings.Should force V34 Might also try shut down and turn power off to the tower. Think the modem should be reset to harware flow control. Note the atz command ftp://ftp.usr.com/usr/dl07/sp_asci.txt Edited by - charles on 12/8/2003 8:06:08 AM Well, disabling V.90 would surely slow things down, but by too much. Remember, I connect at 50.666 kbs and get throughput of 44-45 kbs. I was trying to slow down the connect speed a little in hopes of getting a little faster throughput. I thought that if I could slow the connect speed to 49.333 kbs, I might improve throughput to 48.0 kbs. But nothing I did would slow the connect speed below 50.666 kbs nor the throughput to less than 44-45 kbs. I know that is just a marginal improvement, but it is part of my experimentation following the huge improvement that I got from eliminating the bad phone. Anyway, I will be away from the computer with the USR modem until April, so further experimentation will have to wait until then. Regards, jimbo

Topic is 2 Pages Long: 1 2

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |