Modemsite Forum56 - The Modem Bulletin Board

Modemsite's Forum56 - The Modem Board
Main | profile | register | search | help | Ad-free Login

Forums | USR (Public) | 3com 3cxm356 pcmcia winmodem

Watch

Author	Topic
Brendi Tl Posts: 19 USA	Posted - 8/9/2004 12:38:05 PM I appreciate you taking the time to help me. I have been over to an elderly neighbor's place mowing for her, so I haven't been at my computer. I will get the info for the modem post to you as soon as I can either get my external floppy drive hooked up to the laptop and copying the files to a disk or by copying the post by hand. It may take some time, but I'll get right to it. Thanks.
Brendi Tl Posts: 19 USA	Posted - 8/9/2004 3:08:15 PM Okay...got my external BackPack floppy drive to finally work...had to burn the drivers to a cd on my main computer & load them from the laptop's cd-rom because I don't have an internal floppy drive on it. Oh well,....I hope the following is what you are asking for. I copied it from Hyperterminal. ati0 5600 OK ati1 D324 OK ati2 OK ati3 3COM-MEGAHERTZ 3CXM356 RS Rev. 2.10.005.0022 OK ati4 3COM-MEGAHERTZ 3CXM356 Settings... B0 E1 F1 L2 M1 Q0 V1 X4 Y0 BAUD=115200 PARITY=N WORDLEN=8 DIAL=HUNT ON HOOK CID=0 &A3 &C1 &D2 &G0 &H1 &I0 &K1 &M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1 S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=007 S11=070 S12=050 S13=000 S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=255 S32=002 S33=000 S34=000 S35=000 S36=014 S38=000 LAST DIALED #: OK ati5 3COM-MEGAHERTZ 3CXM356 NVRAM Settings... Template Y0 DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4 BAUD=9600 PARITY=N WORDLEN=8 &A3 &C1 &D2 &G0 &H1 &I0 &K1 &M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1 S00=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=007 S11=070 S12=050 S13=000 S15=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=255 S32=002 S33=000 S34=000 S35=000 S36=014 S38=000 S40=000 S42=000 Strike a key when ready . . . a Template Y1 DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4 BAUD=9600 PARITY=N WORDLEN=8 &A3 &C1 &D2 &G0 &H2 &I2 &K1 &M4 &N0 &P0 &R1 &S0 &T5 &U0 &Y1 S00=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060 S08=002 S09=006 S10=007 S11=070 S12=050 S13=000 S15=000 S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008 S29=020 S30=000 S31=255 S32=002 S33=000 S34=000 S35=000 S36=014 S38=000 S40=000 S42=000 STORED PHONE #0: #1: #2: #3: OK ati6 Chars sent 0 Chars Received 0 Chars lost 0 Octets sent 0 Octets Received 0 Blocks sent 0 Blocks Received 0 Blocks resent 0 Retrains Requested 0 Retrains Granted 0 REJs Received 0 Blers 0 Link Timeouts 0 Link Naks 0 Data Compression NONE Equalization Long Fallback Disabled Last Call 00:00:00 No Connection OK ati7 Configuration Profile... Product type US/Canada Internal Options V32bis,V.34+,x2,V.90 Fax Options Class 1 VXD date 02/16/99 VXD rev 2.10.005.0022 OK ati8 Black List Numbers Tries Delays OK ati9 ERROR ati10 VXD Configuration Profile... VXD version 2.10.005.0022 VXD date 02/16/99 Link mode Direct Clock mode Interrupt VCOMM detected Yes IRQ B I/O base 110 Novram status Up-to-date OK ati11 3COM-MEGAHERTZ 3CXM356 Link Diagnostics... Modulation Unknown Speed Carrier Freq (Hz) Symbol Rate Trellis Code Nonlinear Encoding Precoding Shaping Preemphasis (-dB) Recv/Xmit Level (-dBm) SNR (dB) Near Echo Loss (dB) Far Echo Loss (dB) Roundtrip Delay (msec) Status OK
Brendi Tl Posts: 19 USA	Posted - 8/9/2004 3:16:47 PM I forgot to mention that the modem is now on Com Port 4. Also, in the ADVANCED CONFIGURATION SETTINGS should I have USE ERROR CONTROL checked? What about USE FLOW CONTROL, HARDWARE (RTS/CTS) or SOFTWARE (XON/XOFF) (which one) and MODULATION TYPE (Standard or Non-standard) checked?
charles Tl Posts: 5879 USA	Posted - 8/10/2004 1:47:35 AM use error control,use flow control,hardware should be checked.Click the view log and post.Need to see what the modem is dialing.MODULATION TYPE should be Standard. Also check the connection properties.click the server type tab,Make sure there is no check mark in log on to network and the only thing that is check at the bottom is TCIP/IP Have you tried one of the strings that was posted? The inf file is loading the modem on com4. S32=128S10=200 if no help try. S32=128S10=200 http://modemsite.com/56k/connectoidedit9xc.asp http://help.stargate.net/dialup/win9x-check.shtml Try this in hyperterminal. AT click enter ATX3S32=128S10=200S25=100DTXXX-XXXX click enter. I would also remove the dial up connection icon in the dial up folder and make a new one. Edited by - charles on 8/10/2004 8:45:20 AM
Brendi Tl Posts: 19 USA	Posted - 8/18/2004 9:29:19 AM Thanks for all of your help. My son has the computer now to see if he can get the modem to work & etc. so I won't be posting anymore. again...thanks!

Topic is 3 Pages Long: 1 2 3

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums |