Forums | USR | Very inconsistent USR 56K EXT Faxmodem | Watch |
Author | Topic |
WodahsEht Tl Posts: 3 USA | Posted - 6/6/2000 10:21:58 PM I don't know where the problem lies, but let me give some of the symptoms: 1) I limited the maximum connect speed to 40000 for stability's sake, and usually that's adequate. 2) If I sign on at LESS than 40000, I get an EXTREME amount of errors for no apparent reason. However, if I disconnect and reconnect immediately, and accomplish a 40000 connection, there are no problems, thus it's not likely a line noise issue. I consider this to be the biggest problem as it's the most frequent. 3) Occassionally, I get tons of errors during a 40000 connection. Blers can rocket into the 5-thousands in a matter of minutes. It is noteworthy that the connection starts off relatively "clean." WodahsEht Edited by - WodahsEht on 6/6/00 10:25:03 PM |
Daveman_750 Tl Posts: 86 USA | Posted - 6/7/2000 3:50:47 PM Sounds like you need RBS links to align to get a good connect. If u get an LT they can supposedly compensate well for multiple RBS links. |
WodahsEht Tl Posts: 3 USA | Posted - 6/7/2000 5:00:11 PM I'm sorry but I didn't understand that at all, hehe. Could you explain what "RBS" and "LT" mean? WodahsEht |
Daveman_750 Tl Posts: 86 USA | Posted - 6/8/2000 12:08:32 PM LT is Lucent Technologies. This is the company that makes the chipset for the modem I'm describing. RBS signals call progress and more info can be found on http://808hi.com/56k/x2-tech.htm and http://808hi.com/56k/rbs2.htm Edited by - v.Richard on 6/11/00 11:01:56 AM |
Daveman_750 Tl Posts: 86 USA | Posted - 6/8/2000 12:10:15 PM Obviously my links didn't work. How do you do links? BTW, just cut and paste the URLs. [Edit: URLs are entered without any special codes. Must have a blank space on each side; must start with either www. or http:// |
v.Richard Tl Posts: 6222 USA | Posted - 6/11/2000 11:00:47 AM What does status line from ati11 show? What are your y11 a/d conversion check values? http://808news.com/56k/diag3com.htm Aloha, |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |